AIR PURIFIERS
IN KITCHENER-WATERLOO AND AREA
BREATHE CLEANER, FRESHER AIR WITH AN AIR PURIFICATION SYSTEM IN YOUR HOME
IWAVE ADVANTAGE
You’ll find iWave’s advanced technology provides the most effective air purification method. Other common air purification technologies require ongoing maintenance with bulb/cell replacement every year or two, making the cost of ownership undesirable.
iWave air purifiers have no harmful byproducts, and most models require no ongoing maintenance and have no replacement parts. In fact, with the iWave-R’s patent-pending self-cleaning design, you can enjoy years of maintenance-free performance.
HOW CAN WE HELP YOU ?
HOW iWAVE WORKS
iWave is an air purifying device that installs in any duct air conditioning system. When air passes over the iWave, ions produced by the device reduce pathogens, allergens, particles, smoke and odors in the air, creating a healthy environment without producing any harmful byproducts.
iWave uses patented technology, called needle-point bi-polar ionization, to create equal amounts of positive and negative ions. When these ions are injected into the air stream, they break down passing pollutants and gases into harmless compounds like oxygen, carbon dioxide, nitrogen and water vapor (see illustration below).
When the ions come in contact with viruses, bacteria or mold, they remove the hydrogen molecules – without them, the pathogens have no source of energy and will die. The ions also attach to allergens like pollen and other particles, causing them to band together until they are large enough to be caught by your ventilation system’s air filter.
iWave’s technology generates the same ions that nature creates with lightening, waterfalls, ocean waves, etc. Nature uses energy and shear to break apart molecules, naturally cleaning the air and producing a healthy environment. The only difference between the iWave’s technology and nature is that the iWave does it without developing harmful ozone.
AIR PURIFIERS FOR EVERY HOME
Would you like the air in your home to be as clean and pure as it can be? Aire One KW can help. We provide air quality testing too. Give us a call to learn more about our indoor air quality testing and products for your home in in Kitchener-Waterloo, Cambridge, Guelph and surrounding areas.
-
How often should I service my boiler?A minimum of once a year is recommended. Heating systems come on an average of 3-8 times per hour during the heating season, these numbers can change dramatically in different style of homes and with different thermostats, but this is a rule of thumb in our industry. There is a lot of wear and tear on the appliance and setting can go out of calibration. Also, it is a requirement by most manufacturers and home insurance companies.
-
Can I add new zones to my existing boiler heating system?It depends if the btu output of the radiators has reached the maximum btu output the boiler can support. Having a professional to come out and calculate is your best bet.
-
How will I know if the boiler I select will work properly for my home?Each room will have a radiator and every radiator has a specific btu output . We calculate the total of the radiator btu outputs, match that with a heat loss/heat gain calculation for the home and that is how we size a boiler system for your home.
-
How does a boiler work to heat my home?A boiler is a device that heats water and then distributes the hot water throughout your home to warm the indoor air. There are two main types of boilers: hot water boilers and steam boilers. Hot water boilers heat water to a temperature of about 82 C. The hot water is then circulated through a system of pipes and radiators throughout the home. The radiators give off heat to the surrounding air, which warms the home. Steam boilers heat water to a temperature of about 100 C, which is the boiling point of water. The steam is then distributed through a system of pipes and radiators throughout the home. The steam condenses back to water on the radiators, which gives off heat to the surrounding air, warming the home. In both hot water and steam boilers, the water in the pipes cools and returns to the boiler after heating the interior spaces. The water is then reheated and recirculated throughout the home. Some boiler models also double as a water heater, eliminating the need for a separate water heater unit. The efficiency of a boiler is measured by its Annual Fuel Utilization Efficiency (AFUE) rating. The AFUE rating is a percentage of the fuel that’s used to heat the water that heats the home. The higher the AFUE rating, the more efficient the boiler. Boilers with medium levels of efficiency have ratings of 90 to 93 per cent.
-
What is the average lifespan of a residential boiler?The typical residential boiler can last between 15 and 20 years. You can find the year your boiler was manufactured by checking the unit’s rating plate. You can also call the manufacturer and give them the unit’s serial number to find out how old your boiler is. If your boiler unit is more than 15 years old, you should consider replacing it with a new boiler, high-efficiency gas furnace or heat pump.
-
Are there any government rebates available for my boiler upgrade?Unfortunately, Ontario homeowners in the Tri-Cities area wanting to invest in a new boiler system for their homes aren’t eligible for rebates under the Home Efficiency Rebate Plus (HER+) program. Heat pumps are the only home heating system covered under HER+, whereby homeowners can get more than $10,000 in rebates on a heat pump installation. This program combines the Enbridge Gas rebate program and the Canada Greener Homes Grant.
HOW BI-POLAR IONIZATION WORKS
iWave devices are bi-polar, meaning they use two emitters to create equal amounts of positive and negative ions. When these ions are injected into the air stream, creating a plasma region, they break down passing pollutants and gases into harmless compounds like oxygen, carbon dioxide, nitrogen and water vapor. When the ions come in contact with viruses, bacteria or mold, they remove the hydrogen molecules from the pathogens. Without hydrogen, the pathogens have no source of energy and will die. The ions also attach to allergens, such as pollen, smoke and other particles, causing them to band together until they are large enough to be caught by filters. iWave’s technology generates the same ions that nature creates with lightning, waterfalls, ocean waves, etc. Nature uses ion energy to break apart molecules, naturally cleaning the air and producing a healthy environment. The only difference between iWave’s technology and nature is that iWave does it without developing detectable ozone. In fact, third party testing of iWave technology by Intertek/ETL to the UL867 ozone chamber test confirmed ozone levels less than 0.00PPM!
AIR PURIFICATION THROUGH BI-POLAR IONIZATION
iWave® brings a new, advanced air purification technology to the HVACR market. This patented technology, called needle-point bi-polar ionization, uses carbon fiber brushes to produce a refined electrical charge to proactively and safely clean the air in residential and commercial buildings. The iWave approach produces equal amounts of positive and negative ions (combined charge neutral) that react and break down pathogens, allergens, particles, smoke, odors and VOCs in the air, creating a healthy environment without producing any harmful byproducts like ozone or unstable ROS (Reactive Oxidation Species) molecules that result in the use of PCO technologies.
THE iWAVE DIFFERENENCE
-
Safely treats the air throughout the home
-
Kills mold, bacteria and viruses
-
Reduces odors from pets, cooking and other sources
-
Reduces allergens, smoke, static electricity and dust in the air
-
NO maintenance - no bulb or other parts to replace
​
WHAT CLIENTS ARE SAYING
Love Dealing with Aire One
Eric did a wonderful job looking at my furnace. We also talked about adding more wire from my thermostat so I can have just the air circulating. Love dealing with Aire one. Great local company.
​
~ Rebecca K.